Firex 428 Ionization Smoke Detector and Alarm (120V wire-in)

Quantity Discounts Available (minimum 12 units of same model) The Firex® 428, 406, and 41216 smoke alarms are ionization 120 V AC smoke alarms for single or multiple station use. (The 41216 Smoke Alarm also includes a False Alarm Control™ feature which allows the user to quiet an unwanted alarm for up to 15 minutes.) NOTE: The 428 alarm is special in that it has an orange line voltage connect wire. If your alarm has a yellow interconnect wire, you cannot use this alarm. *This alarm can be interconnected with the discontinued models that it replaces These units mount to any single or 4" octagon junction box or square-to-round drywall ring and has 8" long pigtails with a Quick Connect harness for permanent connection. Firex AC smoke alarms are for single or multiple station use and interconnect with other Firex smoke alarms (see Technical Specifications below for interconnect quantities and compatibility). This Firex should be placed in single-family households or in each individual living unit of multiple-family buildings. Features and Benefits: Dual ionization smoke sensing chamber — early detection of fast burning fires such as gasoline, cooking grease and paper. Installation design and features similar to other Firex smoke alarms — Contractor familiarity with installation Interconnect Flexibility — Product line offers contractors the right number of interconnects for their application (12 smoke alarms max, 6 heat alarms max Compatible FIREX® devices) Lighted Power/Alarm LED — Confirms unit is receiving power and provides visual indication of initiating alarm in interconnected systems Incorporates Firex installer-focused innovations — Fastest and easiest installation available False Alarm Control™ — Quiets unwanted alarms for up to 15 minutes Technical Specifications: Interconnect Quantity 428-12 units Electrical Rating 120V AC, 60Hz, 50mA max Alarm Point obs. 1.1±0.47%/ft. Horn Output 85 decibels at 10 feet Detection Type Dual Ionization Chamber Humidity Rating 10%-93% Relative Humidity Get the SPEC SHEET Get the PRODUCT MANUAL

 Other Items from Wire-In Type

  BRK 4120B Interconnectable Smoke Alarm (wire-in w/9V back-up) - NO LONGER AVAILABLE....REPLACED BY SA9120B....WIRE CONNECTOR IS THE SAME, MOUNTING BRACKET IS DIFFERENT
  BRK SC9120B Smoke & Carbon Monoxide Combo Alarm (AC w/ battery back-up) - Quantity Discounts Available (minimum 12 units of same model) REPLACES the 4120B.
  Firex 484 Photoelectric Smoke Alarm (120 wire-in) - *MODEL: PG-40.
  Firex 4480 Photoelectric Smoke Alarm (wire-in w/9v back-up) - 
  Firex 5000 Smoke Alarm w/False Alarm Control (wire-in w/battery back-up) - 
  Firex 45184 Moisture Resistant Ionization Smoke Detector and Alarm (wire-in w/9V back-up) - 120 AC direct wire battery backup smoke alarm with Moisture Resistant Coating.
  Firex 50004 Moisture Resistant Ionization Smoke Detector and Alarm (wire-in w/9V back-up) - 120 AC direct wire battery backup smoke alarm with Moisture Resistant Coating.
  BRK 7010B Photoelectric Smoke Detector and Alarm (AC battery back-up) - Quantity Discounts Available (minimum 12 units of same model) formerly BRK 2002RAC.
  Firex 4518 Ionization Smoke Alarm (wire-in w/9V back-up) - REPLACES the 120-538B. (Also replaces FX1218. However, the wire connectors and mounting brackets are different and need to be changed.)
  Firex 45189 Ionization Smoke Alarm (wire-in w/9V Lithium back-up) - REPLACES the 120-538B. (Also replaces FX1218. However, the wire connectors and mounting brackets are different and need to be changed.)
  Firex 428 Ionization Smoke Detector and Alarm (120V wire-in) - *REPLACES DISCONTINUED Models: FX1020, FXW-1A, or FX1106.