REPLACES the 120-538B. (Also replaces FX1218. However, the wire connectors and mounting brackets are different and need to be changed.)

Firex 45189 Ionization Smoke Detector and Alarm (wire-in w/9VLithium back-up)

Firex 45189 Ionization Smoke Alarm (wire-in w/9V Lithium back-up)


Quantity Discounts Available (minimum 12 units of same model)

SAME AS 4518 BUT WITH A LONG-LIFE LITHIUM BACKUP BATTERY!

The Firex 45189 Smoke Alarm is an ionization 120V AC smoke alarm with a long-life 9v lithium battery back-up for single or multiple station use. It includes a False Alarm Control™ feature which allows the user to quiet an unwanted alarm for up to 15 minutes. The 45189 has an 85 decibel horn, test switch and separate lighted power and alarm LED indicators; the green ”power on” LED confirms constant AC power and the red LED displays alarm/battery status.

Firex developed the False Alarm Control™ feature to quiet unwanted alarms as a safety precaution to discourage users from removing the battery during a non-threatening alarm. It meets building code requirements where DC battery back-up is required and is recommended for all smoke alarm installations to provide added fire protection in the event of a power failure. With safety features such as battery ”lock-out” and the tamper-resistant locking pin as well as state-of-the-art production testing equipment, the Firex 4518 provides superior fire protection and convenience.

This unit mounts to any single or 4” octagon junction box or square-to-round drywall ring and has 8” long pigtails with a Quick Connect harness for permanent connection. The 45189 is interconnectable up to 18 units, 6 of which may be Firex heat alarms. When interconnected with other Firex smoke alarms, the unit that initiates an alarm will display a rapidly flashing red LED while the other interconnected alarm LEDs remain extinguished. This Firex unit should be placed in single-family households or in each individual living unit of multiple-family buildings.

Features and Benefits

  • NOW FEATURING Latching LED — Red LED flashes until reset for quick, clear identification of the initiating alarm in an interconnected system (item 4518, and 45189 only)
  • False Alarm Control™ — Quiets unwanted alarms for up to 15 minutes
  • 9 Volt Lithium Battery Back-up (battery included) — provides added protection in the event of a power failure
  • Interconnects with other Firex smoke alarms and heat alarms — Compatible with other contractor preferred Firex products
  • Two separate lighted LEDs — Green ”power-on” LED confirms constant AC power and red LED displays alarm/battery status
  • Incorporates Firex installer-focused innovations — Fastest and easiest installation available
  • Factory sealed housing — Prevents tampering and provides outstanding durability
  • Attractive low profile design — Our contemporary StyleLine design is a favorite among consumers


    • Technical Specifications
    Product Weight 8 ounces
    Operating Temperature 40 degrees C to 100 degrees F
    Interconnect Quantity Up to 18 Firex devices maximum
    Electrical Rating 120V AC, 60Hz, 50mA max, 9 volt Lithium Battery Back-up
    Alarm Point 1.29±0.51%/ft. obscuration
    Horn Output 85 decibels at 10 feet
    Detection Type Dual ionization chamber
    Humidity Range 10% - 93% relative humidity

    Get the SPEC SHEET

    Get the PRODUCT MANUAL
    Price: $21.99
    Buy Product Online | Visit Store Home
     
    Manufactured by Firex


     Other Items from Wire-In Type

      BRK 4120B Interconnectable Smoke Alarm (wire-in w/9V back-up) - NO LONGER AVAILABLE....REPLACED BY SA9120B....WIRE CONNECTOR IS THE SAME, MOUNTING BRACKET IS DIFFERENT
      BRK SC9120B Smoke & Carbon Monoxide Combo Alarm (AC w/ battery back-up) - Quantity Discounts Available (minimum 12 units of same model) REPLACES the 4120B.
      Firex 484 Photoelectric Smoke Alarm (120 wire-in) - *MODEL: PG-40.
      Firex 4480 Photoelectric Smoke Alarm (wire-in w/9v back-up) - 
      Firex 5000 Smoke Alarm w/False Alarm Control (wire-in w/battery back-up) - 
      Firex 45184 Moisture Resistant Ionization Smoke Detector and Alarm (wire-in w/9V back-up) - 120 AC direct wire battery backup smoke alarm with Moisture Resistant Coating.
      Firex 50004 Moisture Resistant Ionization Smoke Detector and Alarm (wire-in w/9V back-up) - 120 AC direct wire battery backup smoke alarm with Moisture Resistant Coating.
      BRK 7010B Photoelectric Smoke Detector and Alarm (AC battery back-up) - Quantity Discounts Available (minimum 12 units of same model) formerly BRK 2002RAC.
      Firex 4518 Ionization Smoke Alarm (wire-in w/9V back-up) - REPLACES the 120-538B. (Also replaces FX1218. However, the wire connectors and mounting brackets are different and need to be changed.)
      Firex 45189 Ionization Smoke Alarm (wire-in w/9V Lithium back-up) - REPLACES the 120-538B. (Also replaces FX1218. However, the wire connectors and mounting brackets are different and need to be changed.)
      Firex 428 Ionization Smoke Detector and Alarm (120V wire-in) - *REPLACES DISCONTINUED Models: FX1020, FXW-1A, or FX1106.

     
      Return To Smoke Detectors Carbon Monoxide Alarms - Fire Safety Store

     

     
    ecommerce solutions
    Shopping cart powered by MonsterCommerce e-commerce solutions.