Firex 5000 Smoke Alarm w/False Alarm Control (wire-in w/battery back-up)

Quantity Discounts Available (minimum 12 units of same model) The Firex® 5000 Smoke Alarm is an ionization 120V AC smoke alarm with battery back-up for single or multiple station use. It includes a False Alarm Control™ feature which allows the user to quiet an unwanted alarm for up to 15 minutes. The 5000 has a front loading battery door, 85 decibel horn, test switch and dual purpose LED indicator; constant green "power on" confirms AC power is present and the flashing red displays alarm/battery status. the latching LED feature clearly identifies the smoke alarm that initiated an alarm in an interconnected system with a constantly illuminated red LED. The LED will remain lit until the test button is depressed on that unit. This smoke alarm mounts to any single or 4" octagon junction box or squared-to-round drywall ring and has 8" long pigtails with a Quick Connect harness for permanent connection. The 5000 can be interconnected with up to 12 smoke alarms and 6 heat alarms for a total of not more than 18 Firex devices. This Firex unit should be placed in single-family households or in each individual living unit of multiple-family households buildings. Features and Benefits: Latching LED - A red LED flashes until reset for quick, clear identification of the initiating smoke alarm in an interconnected system. Visible Low Battery Indicator - Helps locate chirping unit. Ramp-Up Test Horn - Allows you to test the unit without the ear-piercing horn. Front loading battery door - Preserves battery life and saves time. Contractors can completely install smoke alarms then simply close door to energize battery back-up when job is complete. Interconnects with other Firex smoke alarms and heat alarms; Compatible with contractor preferred Firex products Large, easy to use push-to-test button; Quickly locate and access test button to test all alarm functions once installation is complete False Alarm Control; Quiets non-threatening alarms and discourages battery removal. Latching LED — Green “power-on” LED confirms constant AC power and red LED displays alarm/battery status Attractive, low-profile design — Our contemporary StyleLine design™ is a favorite among consumers Interconnect Quantity; Up to 18 Firex devices maximum: 12 smoke alarm items and up to 6 heat alarms max. Electrical Rating — 120V AC, 60Hz, 50mA max, 9 Volt Battery Back-up Technical Specifications: Interconnect Quantity Up to 18 Firex devices maximum Operating Temperature 40F to 100F (4-38C) Interconnect Quantity Up to 18 Firex devices maximum: 12 smoke alarm items 5000 and up to 6 heat alarms max. Electrical Rating 120V AC, 60Hz, 50mA max, 9 Volt Battery Back-up Alarm Point obs. 1.29± 0.51%/ft. Horn Output 85 decibels at 10 feet Detection type Dual ionization chamber Humidity Range 10% to 93% relative humidity Get the SPEC SHEET Get the PRODUCT MANUAL

 Other Items from Wire-In Type

  BRK 4120B Interconnectable Smoke Alarm (wire-in w/9V back-up) - NO LONGER AVAILABLE....REPLACED BY SA9120B....WIRE CONNECTOR IS THE SAME, MOUNTING BRACKET IS DIFFERENT
  BRK SC9120B Smoke & Carbon Monoxide Combo Alarm (AC w/ battery back-up) - Quantity Discounts Available (minimum 12 units of same model) REPLACES the 4120B.
  Firex 484 Photoelectric Smoke Alarm (120 wire-in) - *MODEL: PG-40.
  Firex 4480 Photoelectric Smoke Alarm (wire-in w/9v back-up) - 
  Firex 5000 Smoke Alarm w/False Alarm Control (wire-in w/battery back-up) - 
  Firex 45184 Moisture Resistant Ionization Smoke Detector and Alarm (wire-in w/9V back-up) - 120 AC direct wire battery backup smoke alarm with Moisture Resistant Coating.
  Firex 50004 Moisture Resistant Ionization Smoke Detector and Alarm (wire-in w/9V back-up) - 120 AC direct wire battery backup smoke alarm with Moisture Resistant Coating.
  BRK 7010B Photoelectric Smoke Detector and Alarm (AC battery back-up) - Quantity Discounts Available (minimum 12 units of same model) formerly BRK 2002RAC.
  Firex 4518 Ionization Smoke Alarm (wire-in w/9V back-up) - REPLACES the 120-538B. (Also replaces FX1218. However, the wire connectors and mounting brackets are different and need to be changed.)
  Firex 45189 Ionization Smoke Alarm (wire-in w/9V Lithium back-up) - REPLACES the 120-538B. (Also replaces FX1218. However, the wire connectors and mounting brackets are different and need to be changed.)
  Firex 428 Ionization Smoke Detector and Alarm (120V wire-in) - *REPLACES DISCONTINUED Models: FX1020, FXW-1A, or FX1106.